PPG Paints
Find paint & wood stains for your next project.
Product Type
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
KL4400 Series Anodic Self-Priming Paint
- Excellent corrosion protection properties
- High solids, VOC compliant
- Self Priming in many applications
pmc
KLF Series Silicone/Alkyd
- Not for immersn/splash/spillage of strong acids/alkalies/solvents
- Use in conjunction with alkyd or silicone/alkyd primers
- VOC Compliant <2.8 lbs./gal (unthinned)
pmc
KL6040 Tri-polar Primer
- VOC compliant <2.8 lbs./gal (unthinned)
- Use as a primer for structural steel, tanks, piping,transmission and communication towers, conveyors, equipment and other similar surfaces
pmc
METALHIDE ONE PAC | 97-676
- Excellent for use in coastal, marine, or off-shore environments
- Provides outstanding corrosion resistance
- Single component that can be partly used and resealed for future
pmc
MULTIPRIME 4160
- Ideal for structural steel, tank exteriors, piping and equipment
- Lead and chromate free
- Rust Inhibitive interior/exterior alkyd primer
pmc
MULTIPRIME 4360
- Excellent corrosion resistance
- May be topcoated with high performance coatings
- May be used on both ferrous and galvanized metal
pmc
PPG NOVAGUARD® 5041 Coating
- 100% solids
- Easy clean
- Resists concentrated acids, caustics and some solvents
pmc
PPG NOVAGUARD™ 5031
- Ultra High Solids
- Excellent chemical resistance
- Excellent resistance to acids, caustics, detergents and other corrosive materials
pmc
NOVAGUARD 810 ER
- Good chemical resistance against wide range of chemicals/solvents
- Rapid cure and return-to-service
- Smooth finish and light color for easy cleaning and inspection
pmc
NOVAGUARD 840 - Part B (Hardener)
- One-coat tank coating system
- Reduced explosion risk and fire hazard
- Suitable for use on primed steel or direct to concrete/masonry
pmc
NOVAGUARD 890
- Easy to clean
- Excellent pit filling capabilities
- Good chemical resistance against wide range of chemicals/solvents
pmc
PPG NOVAGUARD® 5090 Epoxy Filler - Components
- Can fill holes up to 1” (2.5 cm) thick on vertical or overhead surfaces without shrinkage or sagging
- Bonds to dry and damp concrete
- Self priming on concrete and steel
pmc
NOVAGUARD 840 - Part A (Base)
- One-coat tank coating system
- Reduced explosion risk and fire hazard
- Suitable for use on primed steel or direct to concrete/masonry
pmc
PHENGUARD 965 - Part A (Base)
- PHENGUARD 965 is a multi-component product. All components are required for use.
- Easy to clean
- Excellent resistance to a wide range of organic acids, alcohols, fats (regardless of free fatty acid content)
pmc
PHENGUARD 965 - Part B (Hardener)
- PHENGUARD 965 is a multi-component product. All components are required for use.
- Easy to clean
- Excellent resistance to a wide range of organic acids, alcohols, fats (regardless of free fatty acid content)
pmc
PITT-GUARD®| 95-245 Series
- Compatible with adherent rust remaining on prepared surfaces
- Excellent adhesion to minimally prepared surfaces
- Self Priming in many applications
pmc
PITT-GUARD® DTR All Weather Epoxy - Part A (Base)
- PITT-GUARD® DTR All Weather Epoxy is a multi-component product. All components are required for use.
- High performance coating for new or old steel
- Self Priming in many applications
pmc
PITTHANE ULTRA LS - Part A (Base)
- Low sheen topcoat with unlimited recoatability
- Outstanding weather resistance w/ excellent color/gloss retention
- Tough and flexible coating
pmc